|
|
|
|
|
|
|
|
|
Widow's mite
|
|
|
Mite, латинский
Mite, английский
- Master instrumentation timing equipment
- Missile integration terminal equipment
- Megapixel imaging technology
- A very small parasite, which causes dermatitis
Mitella [ae, f], латинский
Miter, английский
Форма стыка
Miter (cutting) attachment, английский
Miter bevel, английский
A piece of material, such as wood, usually cut at a bevel, 1 of 45°, used with a similarly beveled piece to form a right-angled joint.
Miter block, английский
In joinery, a wood block arranged for sawing pieces at an angle of 45°. miter board, miter shoot a board on which material to be planed is laid; guides or stops hold the material at the prescribed angle so that the ends of the miters can be planed at the correct angle.
Miter board. miter square 1. in carpentry, a square with a handle having one edge with a bevel at an angle of 45°; used for laying out miter joints. 2.a bevel square with a blade having a fixed angle of 45° for marking miters prior to cutting., английский
Miter box, английский
A device for guiding a handsaw at the proper angle in making a miter joint; often a narrow wooden box having a bottom and two sides in which kerfs are cut (usually at an angle of 45°) for guiding the saw. mission parapet 636 mission tile miter box
Miter brad, английский
Miter clamp., английский
Miter cramp, английский
Miter cut, английский
Any oblique cut across two pieces of board or molding, so that when joined they form an angle.
Miter cutting, английский
Miter dovetail, английский
Miter ending, английский
The end of a member having an angular, dovetailed, or square member which is designed to fit into an adjacent matching member so as to provide a continuous profile at the joint.
Miter gauge, английский
A gauge for determining the angle of a miter.
Miter gear, английский
Bevel gear 1 mit sampler a single-tube, drive-type, soil-sampling barrel especially adapted to sampling deposits of plastic clay where a minimum 5-inch-diameter sam¬ple is required a loop or snare of piano wire is inserted in a groove inside the cutting shoe with the free end of the wire extending through a slot on the side of the sampler to the surface when pulled, the wire cuts the sample off at the bottom of the cutting shoe
Miter join, английский
The join style where the ends of two consecutive lines or paths form a sharp or a clipped corner, depending on whether the length of the miter exceeds the miter limit.
Miter joint, английский
- The joint of two pieces at an angle that bisects the joining angle. for example, the miter joint at the side and head casing at a door opening is made at a 45° angle.
- A juncture between front and temple where both mating surfaces are angularly cut.
- A joint between two members at an angle to each other; each member is cut at an angle equal to half the angle of the junction; usually the members are at right angles to each other.
- A joint that forms a corner with both pieces usually cut at a 45 degree angle when forming a 90 degree corner.
Miter knee, английский
The miter joint between the horizontal handrail at a stair landing and the adjacent angled handrail of the descending stairs.
|
Лепта вдовицы, русский
Неделя после троицы, русский
|
|
|
|
|
|
|