|
|
|
|
|
|
|
|
|
Face plate
| Глоссарий по мебели и фурнитуре (английский) |
The outer of a double forend. a strip of metal fixed to the inner forend, thus forming a double forend.
|
План шайба, русский
|
Face, английский
- "лицо" (глаза, нос, рот, щеки и губы)
- The front part of the head, from the forehead to the chin
- Side of a hill or mountain being logged.
- Field ancillary computer effort
- Federation of associations on the canadian environment
- The front part of the head, where the eyes, nose and mouth are placed verb to have your face towards or to look towards something please face the screen.
- Скол
- The edge of a sharp instrument. also, the word of command to soldiers, marines, and small-arm men, to turn upon the heel a quarter or half a circle round in the direction ordered.
- [1] usn command to turn on the heel to left or right as ordered (the rn term is turn). [2] the after surface of a propeller blade (confusingly, the forward surface is the “back”).
- That part of a bit in contact with the bottom of a borehole when drilling is in progress and which cuts the material being drilled. also called cutting face, working face.
- To cover or build up a surface, such as the face or cutting points of a bit, with a layer of metal usually applied by a welding method. see dress 1, hard face. `
- One of the flat, more or less smooth, surfaces of a mineral crystal. 4. the bottom of a drill or borehole. 5. in any adit, tunnel, stope, or other underground workplace, the end at which work is progressing or was done last. also called. working face.
- The horse`s head. also, to turn toward a cow.
- The front side of the fabric as opposed to the back. this is the side of the fabric that is normally treated and tested to meet commercial standards. see id cord.
- The active front of excavation of the coal/ore in a mine.
- The location where excavation is taking place.
- The undisturbed soil immediately ahead of the shield.
- Треугольная или четырехугольная плоская поверхность, являющаяся базовым элементом произвольной трехмерной поверхности.
Face, португальский
Face -, английский
Откосная дрена
Face access, английский
Access to the location where excavation is taking place, typically through the cutting chamber. mtbm configuration may only allow limited personnel access to the back of the cutter wheel from within the pipe string. an air lock may also be required in the rear of the mtbm to maintain air pressure for counterbalancing earth and groundwater pressures.
Face advance, английский
Face angle, английский
Угол наклона граней (угол ме.- 4-1 -25- ду двумя противоположными гранями индентора)
Face area, английский
Face belt conveyor, английский
Face belt joints, английский
Face boss, английский
Face brick, английский
Face card, английский
Term used to describe a one hundred dollar bill. example sam passed will a face card.
Face centered, английский
(concerning cubic space lattices) - having equivalent points at the corners of the unit cell and at the centers of its six faces. a face-centered cubic space lattice is characteristic of one of the close-packed arrangements of equal hard spheres.
Face chamber, английский
Face change; font change;, русский
Face clearance, английский
The distance between the face of a panel or light of glass and the nearest face of its retaining frame or stop, measured normal to the plane of the panel or glass.
Face cleat, английский
Face climbing, английский
To ascend a vertical rock face using finger holds, edges and smears, i.e. not crack climbing.
Face concentration, английский
Face conveyor, английский
Face conveyor removal, английский
|
Backplate, английский
- The plate, fixed on a door, to which the moving parts of a lock or latch are attached.
- A plate, usually metal or wood, which serves as a backing for a structural member.
- Подложка мишени
- Задний щиток
- Опорная подкладка (металлическая или деревянная)
Pin tumbler mechanism, английский
The mechanism incorporated in the cylinder or body of a cylinder pin tumbler lock, latch or padlock, usually referred to as a cylinder lock, latch or padlock. other than padlocks, the cylinder with its co-axial plug housing the pins and drivers under spring pressure passes through the thickness of the door, and the correct key lines up the pins and drivers to make a clear line of intersection between plug and cylinder, thus allowing the plug to rotate and the lock to be operated. the mechanism offers high security against key interchangeability and anti-pick mushroom drivers are usually included in every cylinder. for example, yale 5 pin cylinders offer up to 24,000 differs as standard. it is also very suitable for master keying, as many different types of locks or latches can be included in the suite. under master key, 12,200 differs are obtainable and under grand master key, 36 different sub suites with up to a total of 2,200 differs can be provided.
|
|
|
|
|
|
|
