|
|
|
|
|
|
|
|
|
Test -
| Строительный глоссарий |
- Испытательное давление
- Кривая результатов испытаний
|
|
|
Texturing, английский
- Офактуривание поверхности, придание поверхности определённой фактуры или текстуры
- The process of crimping, imparting random loops, or otherwise modifying continuous filament yarn to increase cover, resilience, abrasion resistance, warmth, insulation, and moisture absorption or to provide a different surface texture. texturing methods can be placed roughly into six groups. (also see textured yarns.) 1. air jet method: in this method of texturing, yarn is led through the turbulent region of an air jet at a rate faster than it is drawn off on the far side of the jet. in the jet, the yarn structure is opened, loops are formed, and the structure is closed again. some loops are locked inside and others are locked on the surface of the yarn. an example of this method is the taslan process. (also see textured yarns, core-bulked yarn and entangled yarn.) 2. edge crimping method: in this method of texturing, thermoplastic yarns in a heated and stretched condition are drawn over a crimping edge and cooled. edge-crimping machines are used to make agilon yarns. (also see textured yarns, coil yarn.) 3. false-twist method: this continuous method for producing textured yarns utilizes simultaneous twisting, heat-setting, and untwisting. the yarn is taken from the supply package and fed at controlled tension through the heating unit, through a false-twist spindle or over a friction surface that is typically a stack of rotating discs called an aggregate, through a set of take© 2001, celanese acetate llc up rolls, and onto a take-up package. the twist is set into the yarn by the action of the heater tube and subsequently is removed above the spindle or aggregate resulting in a group of filaments with the potential to form helical springs. much higher processing speeds can be achieved with friction false twisting than with conventional spindle false twisting. both stretch and bulked yarns can be produced by either process. examples of false-twist textured yarns are superloft®, flufflon®, and helanca®. (also see textured yarns, coil yarn.) 4. gear crimping method: in this texturing method, yarn is fed through the meshing teeth of two gears. the yarn takes on the shape of the gear teeth. (also see textured yarns, crinkle yarn.) 5. knit-de-knit method: in this method of texturing, the yarn is knit into a 2-inch diameter hose-leg, heat-set in an autoclave, and then unraveled and wound onto a final package. this texturing method produces a crinkle yarn. (also see textured yarns, crinkle yarn.) 6. stuffer box method: the crimping unit consists of two feed rolls and a brass tube stuffer box. by compressing the yarn into the heated stuffer box, the individual filaments are caused to fold or bend at a sharp angle, while being simultaneously set by a heating device. (also see textured yarns, crinkle yarn.)
Tertiary -, английский
Дробилка третичного дробления
|
|
|
|
|
|
|
