|
|
|
|
|
|
|
|
|
Apparent thermal conductivity
| Глоссарий по геотермальной энергии |
This value differs from bulk thermal conductivity as apparent thermal conductivity also includes contact resistance when measured, as described in the heat transfer fundamentals section of this guide. also see thermal conductivity.
|
|
Conductivity, английский
- Conductivité
- The rate at which heat is transmitted through a material.
- A term used in describing the capability of a material to carry an electrical charge. usually expressed as a percentage of copper conductivity copper being one hundred (100%) percent. conductivity is expressed for a standard configuration of conductor.
- Проводимость
- Удельная электропроводность; удельная электрическая проводимость
- Parameter used for characterising hydrogeological conditions, more
- This is the inverse of resistance, and refers to the ability of a conductor to carry current.
Resistance, английский
- Property of a conductor that opposed the current flow produced by a given difference of potential. the ohm is the practical unit of resistance.
- Уровень сопротивления - уровень цен, при котором активные продажи могут приостановить или развернуть тенденцию к повышению;
- Сопротивление (параметр)
- Сопротивление
- Сопротивление, т. е. уровень цен, при котором активные продажи могут приостановить или развернуть тенденцию к повышению.
- 1. the ability of a person not to get a disease 2. the ability of bacteria or a virus to remain unaffected by a drug the bacteria have developed a resistance to certain antibiotics. 3. opposition to a force
- Resistencia
- Устойчивость; резистентность resource for child health (reach)
- Устойчивость; резистентность
- The property of opposing movement, for example [1] electrical conductors offer resistance to the flow of electricity and dissipate some of its energy, usually as heat. [2] water resists the movement of vessels or other objects by parasitic drag, consuming some of the power available to drive the vessel forward.
- Imperviousness of the coating to mechanical, chemical, physical or weather influences
- Capacity of a member or component, or a cross-section of a member or component of a structure, to withstand actions without mechanical failure e.g. bending resistance, buckling resistance, tension resistance
- A material’s ability to restrict the flow of electrical current through itself. measured in ohms.
- The opposition of a circuit to the flow of current . resistance is measured in ohms, and can be calculated by dividing the voltage by current.
- The ability to impede (resist) the flow of electric current. with the exception of superconductors, all substances have a greater or lesser degree of resistance. substances with very low resistance, such as metals, conduct electricity well and are called conductors. substances with very high resistance, such as glass and rubber, conduct electricity poorly and are called nonconductors or insulators.
- An effective upper bound on prices achieved because of many willing sellers at that price level.
- Capacity of a component, or cross section of a component of a structure to
- The opposition to the flow of an electrical current through a conductor or circuit that does not include inductive or capacitive elements. it can be expressed as the ratio of the applied voltage to the current.
- Resistance is the opposition to the flow of an electrical current through a conductor. its unit is the ohm.
Fundamentals, английский
- The basic or essentials skills (e.g., good stance, grip, bridge, and stroke) required to be a good player
- Основные положения, основы (напр, расчёта)
Fundamental, английский
- A основной; ко- ренной; базисный, главный, существенный frequency fusing a использующий фузию
- The lowest frequency in a complex sound wave.
|
Bondline thickness, английский
Average thickness between heat spreading device and components. boron nitride (bn)
Chomerics alumina (alo), английский
A relatively inexpensive ceramic in powder or sintered sheet form. its thermal conductivity of w/m-k and excellent dielectric properties make it useful in low to moderate power commercial applications.
|
|
|
|
|
|
|
