|
|
|
|
|
|
|
|
|
Check valve (hydraulics)
| Глоссарий терминов смазочных материалов |
In hydraulic and lubrication systems, a valve permitting flow in only one direction.
|
|
Lubrication, английский
- The control of friction and wear by the introduction of a friction-reducing film between moving surfaces in contact. the lubricant used can be a fluid, solid, or plastic substance.
- Смазка
- On no account should oil be used to lubricate pin-tumbler cylinders. graphite is the conventional lubricant for this mechanism.
- Смазка (действие)
- The act of injecting a fluid, normally bentonite and/or polymers, to reduce the skin friction and jacking forces on the jacking pipe during installation. the fluid fills the annular space.
- Means of reducing friction either around a pipe being jacked or a shaft being sunk into the ground.
- The control of friction and wear between two moving, touching surfaces by placing a friction-reducing substance between them.
- Control of friction and wear by the introduction of a friction reducing film between moving surfaces in contact. the film may be fluid, solid or plastic.
- Reduction of friction or wear between two load-bearing surfaces by the application of a lubricant; includes boundary lubrication (thin or interrupted fluid film, especially bearings where wear occurs); mixed film, where some liquid pools support the load; elastohydrodynamic (high-pressure loads increase the lubricant’s viscosity and load-carrying capacity, especially in gears); hydrodynamic (a thick fluid film lubrication, especially in journal bearings) and hydrostatic (external pump pressure used to form a thick fluid film, as in start-up of journal bearings).
|
Chlorinated paraffin, английский
An additive used for severe or difficult metal cutting or metal working operations.
Channeling point (gears), английский
A federal test that measures the tendency of lubricants at low temperatures to form plastic structures of sufficient strength to resist flow under gravitational forces only. this test is specified and required for mil 2105- type gear oils.
|
|
|
|
|
|
|
