|
|
|
|
|
|
|
|
|
Непрерывности
| Глоссарий технических терминов |
|
Modulus, английский
- Модуль; коэффициент ~ of compression сжимаемость ~ of deformation модуль деформации ~ of elasticity модуль (продольной) упругости ~ of elasticity in tension модуль упругости при растяжении ~ of elasticity in shear модуль сдвига ~ of elongation модуль продольной упругости при растяжении, модуль юнга ~ of foundation коэффициент постели ~ of incompressibility модуль объёмной упругости ~ of inertia модуль инерции ~ of resilience 1. среднее значение удельной работы упругой деформации (стержня, напряжённого до предела упругости) 2, ударная вязкость ~ of rigidity модуль сдвига, модуль упругости при сдвиге
- The ratio of change in stress to change in strain following the removal of crimp from the material being tested, i.e. the ratio of the stress expressed in either force per unit linear density, or force per unit area of the original specimen, and the strain expressed as either a fraction of the original length or percentage elongation.
- The ratio of change in stress to change in strain following the removal of crimp from the material being tested; i.e., the ratio of the stress expressed in either force per unit linear density or force per unit area of the original specimen, and the strain expressed as either a fraction of the original length or percentage elongation. (also see young’s modulus.)
- In the testing of rubber, it is the force in lbs./in. squared or pascals of initial cross-sectional area necessary to produce a given percentage of elongation.
- The ratio of stress to strain; that property of a material, which, together with the geometry of a specimen, determines the stiffness of the specimen. in the physical testing of rubber, the force necessary to produce a stated percentage of elongation.
|
|
Преломления, русский
Modulated, английский
|
|
|
|
|
|
|
