misalignment | - Improper relative positioning of an image or images.
- Смещение; несовпадение; несоосность, отклонение от оси
несоосность; смещение; несовмещение;; разрегулировка; разъюстировка; разориентация; неточность установки; отклонение от ооооноо- ти; разъюстировка; |
newton`s rings | Light interference patterns signifying intimate contact between phototool |
bend lines | Lines approximately half etched into the metal surface that can be used to |
lamination, surface | Longitudinal digs, lines, or open, broken blisters on the surface of |
covers (lids) | Manufactured by pcm and used to cover electronic thick film packages. |
evaporation mask | Manufactured by pcm or pef and used as a stencil when vacuum |
scuff | Marks on the surface of flat-rolled metal caused by surface-to-surface rubbing. |
wrong reading | Obsolete terminology for defining geometric orientation of phototooling. |
xenon | - One of the gases used to fill gas discharge lamps. the gas provides for high
- Ксенон
- Ксенон. газообразный элемент, атомный номер 54, относительная атомная масса 131,30, си...
ксенон; |
halogen | - One of the group vii, non-metallic elements including fluorine, chlorine,
- Any of the nonmetallic elements — fluorine, chlorine, bromine, and iodine — or any gaseous chemical compone...
halógeno; галоген; |
chemical blanking | Originally used to describe pcm. see photo chemical machining. |
photoetching | Originally used to describe pcm. see photo chemical machining. фототравление; |
photofabrication | - Originally used to describe pcm. see photo chemical machining.
- Фотографический метод изготовления
фотографический метод изготовления; |
photomilling | Originally used to describe pcm. the term was restricted to a surface |
suspension head assembly | Part of a device made by pcm used to read/write information |
border data | Patterns which appear in the border area of phototooling; these patterns may |
photo chemical machining | Pcm. the process of using photoresist to preserve the surface |
photo chemical machining institute | Pcmi. the trade association for the photo chemical |
aperture masks | Perforated metal foil used in the production of colour television screens. |
phototooling aids | Photographic products used to assist in inspection, i.e., as overlays, and |
dry film resist | Photoresist supplied in sheet laminate form as rolls. also see photoresist. |
chrome on glass | Phototool used for precise and accurate work. |
orthochromatic | Silver emulsion spectrally sensitive to blue, green, and yellow frequencies. |
panchromatic | Silver emulsion spectrally sensitive to the entire visual portion of the |
lead frame | Small metal strips manufactured on a frame in such a way that makes |
stringers | - Streaks or clustered discolourations on the surfaces of alloys containing
- A name sometimes applied to shelf-pieces (which see). also, heavy timber similarly carried round a ship to ...
стрингеры; |
bulls eye | Stylized pattern located in the border area of a phototool to assist in |
register marks | - Stylized patterns placed in the border area of the phototooling to facilitate
- Crosses or other targets applied to original copy prior to photography. used for positioning films in r...
|
power of source | The amount of luminous flux emitted from a source into a solid angle. |
radiant intensity (power of source) | The amount of power from a point source generated |
pattern area | The area of designed configuration that includes the pattern and |
straight walling | The continued etching of the part after breakthrough to reduce the |
z axis | The depth direction, in a three dimensional system of coordinates. |
electroforming | The growing of metal in an electroplating bath on a mandrel (solid/ wax/ electroplastia; formación electrolítica; электроформирование; |
x axis | The horizontal or left-to-right direction in a two-dimensional system of |
base material | The material to which a coating or plating is applied, and/or from which основной материал; |
photometry | - The measurement of visible light intensity and energy as it affects the human
- The measurement of quantities associated with light.
- Фотометрия
- Фотометрия. метод...
fotometría; фотометрия; |
etch band design | The method of designing artwork for the photochemically machined |
etched blank | The photochemically machined work piece in the flat or preformed |
photoplotting | The photographic process whereby an image is generated by the motion |
photomask registration | The procedure for precise alignment of a phototool to the blank |
emulsion hardening | The process inherent in the developing of a photographic layer, |
photolithography | The process of lithographic printing from a photographically produced фотолитография; |
photo electro forming (pef) | The process of using photoresist as a mold on the surface of |
photoresist hardening | The process whereby photoresist is rendered more resistant to the |
exposure (e) | The quantity of light received per unit area of the layer. exposure may be |
spectral sensitivity | The rate of response of a photographic material to a particular range sensibilidad espectral .; |
etch factor | The ratio of the etched depth to the lateral etch, or undercut. |
transparency (t) | The ratio of transmitted radiation to that incident on a uniformly |
redox | The reduction-oxidation potential in an electrochemical reaction involving the окисление; окислительно-восстановительный; |
electroetching | The removal of metal from a surface through the action of an electrically |
illuminance (or illumination) | The result of luminous flux striking a surface. in english |
fluidics | - The science and technology of using a flow of liquid or gas (these are often
- Рабочее тело струйной системы может быть жидким, газообразным или комбинированным ; теория и практика пр...
|
chemical machining | The selective removal of stock from base material by chemical химическая механическая обработка; |
emulsion side | The side of a photographic film or plate, which has the photographic layer lado emulsión; |
resolution usable | The smallest image that can be produced and subsequently processed in |
photoresist integrity | The soundness of a photoresist measured in terms such as chemical |
cleanliness classes | The statistically allowable number of particles per cu ft of air as per |
nanotechnology | - The study, development and processing of materials, devices and systems
- The usage of matter on the nanometer scale to produce structures, systems, and technological devices.
... нанотехнология; нанотехнологии; |
master drawing | - The technical drawing of the etched blank whose documented dimensions
- Оригинал; эталонный чертеж; чертеж-прототип; рисунок-прототип
|
etch allowance | The total dimensional adjustment, expressed in inches, mils or millimetres |
y axis | The vertical direction, perpendicular to the x-axis, in a two-dimensional system of |
conversion coating | Treatment of the surface of the substrate by high temperatures or конверсионное покрытие; |
off-contact | Two surfaces separated slightly from each other. |
ulpa filter | Ultra low penetration air filters are extended media, dry filters in a rigid |
inclusions | - Undesired materials in a solid matrix.
- Prokaryotic cell cytoplasmic structures for storing specific nutrients and other resources needed by cells
включения; |
tabs or tags | Unetched portions of a substrate, which tie the etched parts together in a |
chlorine regeneration | Used to regenerate ferric chloride to maintain good quality acid for |
backlighting | - Viewing or photographing an object by placing it between a light source and
- From camera position, light that comes from behind the subject. usually, a backlit main subject will be u...
contraluz; hintergrund-ausleuchtung; illuminación a contraluz; подсветка сзади; |
mirror image photo-tool | When two pieces of film with their emulsions facing each other |
xrf | X-ray fluorescence. used for the analysis of plating finishes, their content and |