|
|
|
|
|
|
|
|
|
Jnt, jt
|
|
Объединенный, совместный, русский
Объединенный, соединенный; совместный, единый, русский
Sealant, английский
- Any material or device used to prevent the passage of liquid or gas across a joint or opening; a sealer.
- Герметик
- Герметик, уплотнитель
- Герметик, герметизирующий состав
Mastic, французский
Seam, английский
- Sidewinder expanded acquisition mode (system)
- Шов
- The sewing together of two edges of canvas, which should have about 110 stitches in every yard of length. also, the identical anglo-saxon word for a horse-load of 8 bushels, and much looked to in carrying fresh fish from the coast. also, the opening between the edges of the planks in the decks and sides of a ship; these are filled with a quantity of oakum and pitch, to prevent the entrance of water. (see caulking.)
- [1] the space between adjacent planks or strakes of a ship—essential to allow for expansion when the wood is wetted and swells, but needing caulking to be watertight. [2] the junction formed by a sailmaker sewing two pieces of canvas together. [3] the joint between two steel hull plates welded or riveted together. [4] a similar line, ridge, or groove made by fitting, joining, or lapping together any two objects.
- A very thin vein of mineral or stratum of sedimentary rock.
- As used by churn drillers, a synonym for crevice.
- 1) a minor, often clay-filled zone with a thickness of some cm. when
- A discontinuity caused by a void or crack in rolled material parallel to the axis of the material which although closed is not welded. a line of junction; a line, groove, ridge, or interstice formed by or between two contracting edges.
- Linear discontinuity formed by a lack of metal from folds produced by an underfilled pass during metal rolling. squeezed tight on subsequent passes, the underfill runs parallel to the longitudinal axis of the bar. 318 visual testing
- Linear surface discontinuity, often oriented parallel to the component’s axis (in other words, longitudinal) and produced during metal rolling. seams can originate from ingot blowholes, cracks, or improper forging.
Жаритесь, русский
Популярное в америке соревнование ковбоев в ловле скота с помощью лассо, езде на необъезженных лошадях и т.п., русский
Roast, английский
Пикник с жареньем мяса на вертеле прием или вечеринка в честь какой-либо персоны (особ. знаменитости), которую гости подвергают шутливой критике и высмеиванию
Rodeo, английский
Загон для клеймения скота
|
|
Joint, английский
- A prepared connection for joining pieces of wood or veneer.
- The location between the touching surfaces of two members or components joined and held together by nails, glue, cement, mortar, or other means.
- The mechanical connection (usually threaded) between the butt and shaft ends of a two-piece cue
- Соединение; стык; объединенный, совместный
- Стык; шов; соединение, связь; шарнир; узел; разъем; совместный, объединенный
- Articulación, coyuntura, junta, juntura, unión
- Articulación, junta, juntura
- The junction of two pieces of wood or veneer.
- A method of joining carpentry work by screws which are hidden.
- A structure at a point where two or more bones join, especially one which allows movement of the bones the elbow is a joint in the arm. arthritis is accompanied by stiffness in the joints. charcot’s 209 juxtaposition joint (note: for other terms referring to joints, see words beginning with arthr-, arthro-.)
- Соединение, муфта;
- The place where any two pieces of timber or plank are united. it is also used to express the lines which are laid down in the mould-loft for shaping the timbers.
- A standard length of drill rod, casing, or pipe equipped with threaded ends by which two or more pieces may be coupled together; also, two or more standard lengths of drill rods or pipe coupled together and handled as a single piece in round trips.
- A fracture or parting that cuts through and abruptly interrupts the physical continuity of a rock mass. not to be confused with bedding or cleavage.
- Geological definition: a discontinuity of natural origin along
- Joint operational incidents training
- Flexible sealing and jointing arrangement between two pipes.
- (1) location where two items meet and come together (for example, where a casting mold cope and cheek, cope and drag, or cheek and drag come together). (2) part of weld where two welded parts meet.
- A single section of drill pipe, casing or tubing that’s usually about 30 feet long.
July, английский
|
|
|
|
|
|
|
