|
|
|
|
|
|
|
|
|
Terminating
Fiber Optic Glossary |
Terminating a fiber is accomplished through preparing the fiber for connection to another fiber or device such as a connector. the goal when terminating is to produce a perfect end to the fiber. the end should be cleanly cut, clear and physically connected to the receiving optical device. this can be accomplished through two means; permanently joining the fibers by welding or gluing the ends of the fiber together, or mechanically aligning the fibers and joining them with transparent gel.
|
|
Connection, английский
- Liaison
- Соединение; связь
- In steel construction, a combination of joints capable of transmitting forces between two or more members. connector 1. in an electric circuit, a device for joining two or more conductors, by a low-resistance path, without the use of a permanent splice. 2. a mechanical device for fastening together two or more pieces, members, or parts, including anchors, fasteners, or wall ties.
- Патрубок с фланцевым соединением
- A link via wire, radio, fiber-optic cable, or other medium between two or more communications devices.
- Someone with whom a user has established a mutual social relationship on a third-party service that refers to such a relationship as a connection.
Permanently, английский
Постоянно
Mechanically, английский
Transparent, английский
- An object or material that transmits both light and undiffused images. tip: try lighting a plain back-ground directly behind the object, not the object.
- Capable of transmitting light so that objects or images can be seen as if there were no intervening material.
- Общедоступная информация в вто присутствует принцип открытого обмена информацией, осуществляемый с целью осведомить всех членов о принимаемых решениях и вопросах, обсуждаемых на совещаниях и встречах маленьких групп
Accomplish, английский
|
Termination and splicing, английский
Termination and splicing equipment for fiber optics include tools or kits for cutting, finishing, positioning, aligning and joining fiber optic cables.
End face, английский
Term often used to describe the end of a ferrule. the end face is finished or polished to have a smooth end, which can minimize connector loss or backreflection. typical polish types are pc, upc, and apc.
|
|
|
|
|
|
|