|
|
|
|
|
|
|
|
|
Resistencia a la tracción .
Глоссарий по архивному хранению медийных материалов |
|
Tensile strength, английский
- Résistance à la traction
- The longitudinal stress required to break a specimen of prescribed dimension divided by the original crosssectional area at the point of rupture (usually expressed in pounds per square inch).
- (also called ultimate strength) - breaking strength of a material when subjected to a tensile (stretching) force. usually measured by placing a standard test piece in the jaws of a tensile machine, gradually separating the jaws, and measuring the stretchi
- Предел прочности на растяжение
- Прочность на растяжение [на разрыв]
- The resistance of a material to rupture when subject to tension; the maximum tensile stress which the material can sustain.
- [1] the resistance of rope to a longitudinal force tending to break it. [2] the force that must be applied to break a rope.
- In general, the strength shown by a specimen subjected to tension as distinct from torsion, compression, or shear.
- 1. in general, the strength shown by a specimen subjected to tension as distinct from torsion, compression, or shear. 2. specifically, the maximum tensile stress expressed in force per unit cross-sectional area of the unstrained specimen, e.g., kilograms per square millimeter, pounds per square inch. (for maximum stress per unit linear density, see breaking tenacity or breaking length.)
- A measure of the ability of a material to withstand a tension (pulling apart) force. it is usually measured in mpa or psi of material cross section. thermal conductivity (k)
- The maximum stress that a material is capable of withstanding without breaking under a gradually and uniformity applied load. other terms commonly used to express the same thing are ultimate tensile strength and, less accurately, breaking strength.
|
|
Tensilized, английский
Resistencia a la tensión ., испанский
|
|
|
|
|
|
|