|
|
|
|
|
|
|
|
|
Sensitivity, radiographic
| Глоссарий терминов по технологиям неразрушающего контроля (NDT) |
The ratio of the smallest difference in thickness that is detectable on the radiograph to the thickness of the specimen. it may be expressed as a percentage, and is an indication of ability to detect a small discontinuity. in practice, it is determined by the use of an image quality indicator (penetrameter).
|
|
Radiographic, английский
Radiographic code, английский
A code for specifying minimum standards related to radiographic practices.
Radiographic contrast (rt), английский
Radiographic equivalence factor (rt), английский
The factor by which the thickness of material must be multiplied in order to determine what thickness of a standard material (often steel) will have the same absorption.
Radiographic exposure device (rt), английский
Radiographic film, английский
Radiographic film (rt), английский
Radiographic inspection, английский
Рентгенографический контроль
Radiographic inspection (rt), английский
The use of x-rays or nuclear radiation or both to detect discontinuities in material, and to present their images on a recording medium.
Radiographic interpretation (rt), английский
The identification of subsurface discontinuities indicated on the radiograph. the evaluation as to the acceptability or reject ability of the material is based upon the judicious application of the radiographic specifications and standards governing the material.
Radiographic paper (rt), английский
White paper coated on one side with emulsion, suitable for some purposes as an alternative to x-ray film.
Radiographic projection method (rt), английский
A method whereby image magnification is achieved by projection.
Radiographic qualification test, английский
A procedure for determining the optimum value of the d/t ratio, or the proper working distance of an x-ray tube or a radioactive source.
Radiographic quality level, английский
Radiographic quality level (rt), английский
An expression of the quality (sensitivity) of a radiograph in terms of an image quality indicator (penetrameter). when a standard hole-type penetrameter is used, quality level is stated as a-bt, where a is the penetrameter thickness, expressed as a percentage of the maximum thickness of the specimen, and b is the diameter of the smallest discernible hole, expressed as a multiple of penetrameter thickness, t. for example, the 3- 2t quality level means that the penetrameter thickness equals 3 percent of maximum specimen thickness, and the smallest discernible penetrameter hole has a diameter equal to twice the penetrameter thickness.
Radiographic radiographic definition (rt), английский
Radiographic range (rt), английский
Radiographic screen (rt), английский
Radiographic screens, английский
Metallic or fluorescent sheets are used to intensify the radiation effect on films.
Radiographic sensitivity (rt), английский
Radiographic technique (rt), английский
The selection of those radiographic factors such as kilovoltage, milliamperage, type of film and screen, distance, and exposure time to render the best possible radiographic sensitivity.
Difference, английский
- Disagreement, inequity, contrast, dissimilarity, incompatibility
- Разница; разность
- An important army term, meaning firstly the sum to be paid by officers when exchanging from the half to full pay; and, secondly, the price or difference in value of the several commissions.
Radiograph, английский
- An image produced on film or another sensitive surface when radiation such as x-rays or gamma rays passes through an object verb to make a radiograph of something, especially a part of the body
- X ray.
Percentage, английский
- Pourcentage
- Процент
- The proportion rate in every hundred or for every hundred what is the percentage of long-stay patients in the hospital?
- Процент; процентное содержание; процентный состав; процентное отношение percentage-of-completion method метод "по мере готовности"
- Процентное значение; значение величины, выраженное в процентах; процентное содержание о ~ by
- Комиссионные (выраженные в процентах)
Indication, английский
- Индикация
- A situation or sign which suggests that a specific treatment should be given or that a condition has a particular cause sulpha drugs have been replaced by antibiotics in many indications. contraindication
- (1) notice given by a dealer (through autex) or customer of an interest in buying or selling stock, sometimes including specific volume and price; (2) approximation of where a specialist sees buy and sell interest to tighten the range to an opening price.
- Выражение интереса (бирж.)
- In nondestructive inspection, a response or evidence of a response, that requires interpretation to determine its significance.
- Nondestructive test response that requires interpretation to determine its relevance. these include such things as meter deflections, shadows on radiographs, blips on screens, or localized discolorations on surfaces. see also defect; discontinuity; indication, false; indication, nonrelevant. indication, discontinuity: visible evidence of a material discontinuity. subsequent interpretation is required to determine the significance of an indication. indication, false: test indication that could be interpreted as originating from a discontinuity where no discontinuity exists. compare defect; ghost; indication, nonrelevant. false indications are an economic liability for inspection because they must be investigated. indication, nonrelevant: indication due to misapplied or improper testing. may also be an indication caused by an actual discontinuity that does not affect the usability of the test object (a change of section, for instance). indication, relevant: indication from a discontinuity (as opposed to a nonrelevant indication) requiring evaluation by a qualified inspector, typically with reference to an acceptance standard, by virtue of the discontinuity’s size, shape, orientation, or location.
- Nondestructive test response that requires interpretation to determine its relevance.4 see also defect; discontinuity; false indication; nonrelevant indication. indication, nonrelevant: indication that has no relation to a discontinuity that might constitute a defect.1 test response caused by geometry or by a physical condition that is not a discontinuity. indication, relevant: indication from a discontinuity (as opposed to a false indication) requiring evaluation by a qualified inspector, typically with reference to an acceptance standard, by virtue of the discontinuity’s size or location.1
- Nondestructive test response that requires interpretation to determine its relevance. compare defect; discontinuity; indication, false; indication, nonrelevant. indication, false: (1) test indication that could be interpreted as originating from a discontinuity but that actually originates where no discontinuity exists in the test object. (2) indication due to misapplied or improper testing. compare indication, nonrelevant; defect. indication, nonrelevant: indication that has no relation to a discontinuity that might constitute a defect. test response caused by geometry or by a physical condition that is not a discontinuity (a change of section, for instance). indication, relevant: indication from a discontinuity (as opposed to a false indication) requiring evaluation by a qualified inspector, typically with reference to an acceptance standard, by virtue of the discontinuity’s size or location.
- Nondestructive test response that requires interpretation to determine its relevance. compare defect; discontinuity. see also indication, false; indication, nonrelevant. indication, false: (1) test indication that could be interpreted as originating from a discontinuity but that actually originates where no discontinuity exists in the test object. (2) indication due to misapplied or improper testing. compare indication, nonrelevant. indication, nonrelevant: indication that has no relation to a discontinuity that might constitute a defect. test response caused by geometry or by a physical condition that is not a discontinuity (a change of section, for instance). indication, relevant: indication from a discontinuity (as opposed to a false indication) requiring evaluation by a qualified inspector, typically with reference to an acceptance standard, by virtue of the discontinuity’s size or location.
- Nondestructive test equipment response to a discontinuity that requires interpretation to determine its relevance.4 in magnetic particle testing, a visible accumulation of magnetic particles that serves as evidence of a magnetic leakage field.
- Defect, discontinuity, false indication and nonrelevant indication. induced current magnetization: noncontact means for testing delicate ring shaped objects for circumferential discontinuities. the technique is based on the fact that a time varying current passing through an internal conductor, often a soft iron or laminated core, self-induces an encircling magnetic field. this time varying magnetic field will induce a secondary current circling through the ring. this secondary current then self-induces the toroidal magnetic field used for testing.
- Nondestructive test equipment response to a reflector, requiring interpretation to determine its relevance. compare crack; defect; discontinuity; indication, false.10 indication, discontinuity: visible evidence of a material discontinuity. subsequent interpretation is required to determine the indication’s significance.10 indication, false: test indication that originates where no discontinuity exists in the test object. compare defect; indication, nonrelevant.10 indication, nonrelevant: indication possibly caused by an actual discontinuity that does not affect the usability of the test object (a change of section, for instance) or that is smaller than a relevant indication. compare indication, false and indication, relevant.10 indication, relevant: indication from a discontinuity (as opposed to a nonrelevant indication) requiring evaluation by a qualified inspector, typically with reference to an acceptance standard, by virtue of the discontinuity’s size, shape, orientation or location. compare indication, nonrelevant.10,19
Discontinuity, английский
- Разрывность (течения, кривой)
- Разрыв (непрерывности); нарушение сплошности; перегиб кривой; разрезность {конструкции) о ~
- [stratigraphy] any interruption in sedimentation, whatever its cause or length, usually a manifestation of nondeposition and accompanying erosion; an unconformity. gg part 629 - glossary 629-24 (430-vi-nssh, 2008)
- An interruption in the normal physical structure or configuration of a part such as cracks, laps, seams, inclusions, porosity. a discontinuity may or may not affect the usefulness of a part. see defect.
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication may be interpreted to be a defect. compare defect; indication. discontinuity, artificial: reference discontinuity such as hole, indentation, crack, groove, or notch introduced into a reference standard to provide accurately reproducible indications for determining test sensitivity levels.
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication can be interpreted to be a defect.4,7 compare defect; indication. discontinuity, artificial: reference discontinuity such as hole, indentation, crack, groove or notch introduced into a reference standard to provide accurately reproducible indications for determining test sensitivity levels.4 discontinuity, inherent: material anomaly originating from solidification of cast metal. pipe and nonmetallic inclusions are the most common inherent discontinuity and can lead to other types of discontinuities in fabrication.2,5 discontinuity, primary processing: discontinuity produced from the hot or cold working of an ingot into forgings, rods, bars and other shapes.2,5 discontinuity, secondary processing: discontinuity produced during machining, grinding, heat treating, plating or other finishing operations.2,5 discontinuity, service induced: discontinuity caused by the intended use of the part.
- Intentional or unintentional interruption in the physical structure or configuration of a part.1,4 after nondestructive testing, unintentional discontinuities interpreted as detrimental in the host object may be called flaws or defects. compare defect, dislocation and indication.1 discontinuity, artificial: reference discontinuities such as holes, indentations, cracks, grooves or notches that are introduced into a reference standard to provide accurately reproducible indications for determining sensitivity levels.1 discontinuity, primary processing: in metals processing, a material anomaly produced from the hot or cold working of an ingot into forgings, rod and bar.1 discontinuity, service induced: material anomaly caused by the intended use of the part.1 display resolution, thermal: precision with which an instrument displays its assigned measurement parameter (temperature), usually expressed in degrees, tenths of degrees, hundredths of degrees and so forth.3
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication may be interpreted as a defect. compare anomaly; defect; indication. drift (electronic): change in output reading of an instrument, usually due to temperature change.
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication may be interpreted as a defect. compare anomaly; defect; indication. discontinuity, artificial: reference anomaly such as hole, indentation, crack, groove, or notch introduced into a reference standard to provide accurately reproducible indications for determining test sensitivity levels. see also known discontinuity standard. discontinuity, inherent: material anomaly originating from solidification of metal. pipe, banding, and nonmetallic inclusions are the most common inherent discontinuities and can lead to other types of discontinuities in fabrication. discontinuity, primary processing: discontinuity produced from the hot or cold working of an ingot into forgings, rods, bars, and other shapes. glossary d-e 497 discontinuity, secondary processing: discontinuity produced during machining, grinding, heat treating, plating, or other finishing operations. discontinuity, service induced: discontinuity caused by the intended use of the part. see also brittle crack propagation; creep; ductile crack propagation; fatigue crack propagation.
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication can be interpreted to be a flaw or a defect.10 compare defect; indication.5,6 discontinuity, artificial: reference discontinuity such as hole, indentation, crack, groove, or notch introduced into a reference standard to provide accurately reproducible indications for determining sensitivity levels.4
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication can be interpreted to be a flaw or a defect.10 compare defect; indication.
Determined, английский
- A предопределённый
- Определенный
Penetrameter, английский
See image quality indicator.
|
Refractive index (ut), английский
The ratio of the velocity of a wave in one medium to the velocity of the wave in a second medium is the refractive index of the second medium with respect to the first. it is a measure of the amount a wave will be refracted when it enters the second medium after leaving the first.
Signal-to-noise ratio (ut), английский
The ratio of the signal from the variable of interest (flaw, thickness change or conductivity change) to signals from variables which are of no interest (lift-off, geometry and finish changes and electronic components).
|
|
|
|
|
|
|
