|
|
|
|
|
|
|
|
|
Blotting (pt)
| Глоссарий терминов по технологиям неразрушающего контроля (NDT) |
The action of the developer in soaking up the penetrant from the surface of the discontinuity, so as to cause maximum bleed out of the dye penetrant for increased contrast and sensitivity.
|
|
Blott, шведский
Blott (a.), шведский
Blotta, шведский
Blotter, английский
Blotting, английский
Absorptive action of developer in soaking up penetrant from surface of a discontinuity so as to cause bleedout of penetrant for increased contrast and sensitivity.
Blotting paper, английский
Бумага с низкой, кажущейся плотностью, предназначенная для поглощения излишних чернил при письме.
Blotting papers, английский
As thin as tissue paper and coated in a layer of powder or another mattifying ingredient, blotting papers work to gently remove oil, bacteria, and excess dirt from your face, especially in the t-zone.
Blotting-pad, английский
Блокнот с промокательной бумагой blow-in card невшитый вкладыш, почтовая открытка с отпечатанным адресом, вложенная в журнал – бланк подписки на журнал или бланк заказа на рекламируемый товар, который можно заполнить и отослать по почте
Blotting-paper, английский
Blotto, legless, paralytic, pissed, английский
Blottställd, шведский
Discontinuity, английский
- Разрывность (течения, кривой)
- Разрыв (непрерывности); нарушение сплошности; перегиб кривой; разрезность {конструкции) о ~
- [stratigraphy] any interruption in sedimentation, whatever its cause or length, usually a manifestation of nondeposition and accompanying erosion; an unconformity. gg part 629 - glossary 629-24 (430-vi-nssh, 2008)
- An interruption in the normal physical structure or configuration of a part such as cracks, laps, seams, inclusions, porosity. a discontinuity may or may not affect the usefulness of a part. see defect.
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication may be interpreted to be a defect. compare defect; indication. discontinuity, artificial: reference discontinuity such as hole, indentation, crack, groove, or notch introduced into a reference standard to provide accurately reproducible indications for determining test sensitivity levels.
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication can be interpreted to be a defect.4,7 compare defect; indication. discontinuity, artificial: reference discontinuity such as hole, indentation, crack, groove or notch introduced into a reference standard to provide accurately reproducible indications for determining test sensitivity levels.4 discontinuity, inherent: material anomaly originating from solidification of cast metal. pipe and nonmetallic inclusions are the most common inherent discontinuity and can lead to other types of discontinuities in fabrication.2,5 discontinuity, primary processing: discontinuity produced from the hot or cold working of an ingot into forgings, rods, bars and other shapes.2,5 discontinuity, secondary processing: discontinuity produced during machining, grinding, heat treating, plating or other finishing operations.2,5 discontinuity, service induced: discontinuity caused by the intended use of the part.
- Intentional or unintentional interruption in the physical structure or configuration of a part.1,4 after nondestructive testing, unintentional discontinuities interpreted as detrimental in the host object may be called flaws or defects. compare defect, dislocation and indication.1 discontinuity, artificial: reference discontinuities such as holes, indentations, cracks, grooves or notches that are introduced into a reference standard to provide accurately reproducible indications for determining sensitivity levels.1 discontinuity, primary processing: in metals processing, a material anomaly produced from the hot or cold working of an ingot into forgings, rod and bar.1 discontinuity, service induced: material anomaly caused by the intended use of the part.1 display resolution, thermal: precision with which an instrument displays its assigned measurement parameter (temperature), usually expressed in degrees, tenths of degrees, hundredths of degrees and so forth.3
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication may be interpreted as a defect. compare anomaly; defect; indication. drift (electronic): change in output reading of an instrument, usually due to temperature change.
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication may be interpreted as a defect. compare anomaly; defect; indication. discontinuity, artificial: reference anomaly such as hole, indentation, crack, groove, or notch introduced into a reference standard to provide accurately reproducible indications for determining test sensitivity levels. see also known discontinuity standard. discontinuity, inherent: material anomaly originating from solidification of metal. pipe, banding, and nonmetallic inclusions are the most common inherent discontinuities and can lead to other types of discontinuities in fabrication. discontinuity, primary processing: discontinuity produced from the hot or cold working of an ingot into forgings, rods, bars, and other shapes. glossary d-e 497 discontinuity, secondary processing: discontinuity produced during machining, grinding, heat treating, plating, or other finishing operations. discontinuity, service induced: discontinuity caused by the intended use of the part. see also brittle crack propagation; creep; ductile crack propagation; fatigue crack propagation.
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication can be interpreted to be a flaw or a defect.10 compare defect; indication.5,6 discontinuity, artificial: reference discontinuity such as hole, indentation, crack, groove, or notch introduced into a reference standard to provide accurately reproducible indications for determining sensitivity levels.4
- Interruption in the physical structure or configuration of a test object. after nondestructive testing, a discontinuity indication can be interpreted to be a flaw or a defect.10 compare defect; indication.
Sensitivity, английский
- Change in the response of a measuring instrument divided by the corresponding change in the stimulus (1)
- The ratio of the output of an instrument to the input (i.e. -gain).
- Defines the smallest signal detectable in the presence of systems noise
- In television, a factor expressing the incident illumination upon a specified scene required to produce a specified picture signal at the output terminals of a television camera.
- For a camera usually specified in lux to provide indication of light level required to gain a full video signal from the camera.
- A measure of the amount of light required to provide a standard video signal. sensitivity values are stated in lux (see lux) or foot-candles.
- Lens iris aperture required to provide a video output signal of standard level at a specified light input. in general, sensitivity is measured using an 89.9% reflectance grey scale chart illuminated by a 3200? k illuminance at 2000 lux (color camera) or 400 lux (b/w camera), for a video output level of 100%.
- 1. the fact of being able to detect and respond to an outside stimulus 2. the rate of positive responses in a test from persons with a specific disease. a high rate of sensitivity means a low rate of people being incorrectly classed as negative. compare specificity
- Чувствительность; сенситивность; восприимчивость специфически измененная реактивность. вероятность возникновения реакции на введение антигенов. ср. susceptibility (восприимчивость (к болезни)).
- The sensitivity of classification rule is a measure of its ability to correctly classify observations into a particular category. it is defined to be the ratio of the number of true positives to the number of positives in a test set. this value is usually inversely related to the specificity of the test for a given set of data and a particular classification rule. note that this measure is different from the positive predictive value of a rule, which is a measure of the probability that a positive is a true positive. if multiple classification categories exist, each category will have its own sensitivity, specificity, and positive predictive value. see also: positive predictive value, specificity.
- Чувствительность: a) различие в концентрации аналита, соответствующее наименьшему обнару-живаемому различию в реакции метода. представляется наклоном калибровоч-ной кривой. иногда ошибочно используется для обозначения предела обнаружения. b) частота истинно положительных результатов, полученных при испытании проб, в которых, насколько известно, содержится аналит [55]. c) отношение изменения показаний измерительного прибора к соответствую-щему изменению измеряемой величины. измеряемой величиной может быть, например, количество исследуемого вещества, содержащееся в пробе.
- Чувствительность. в сенсорном анализе — способность различать, идентифицировать и/или дифференцировать (качественно и/или количественно) один или более раздражителей с помощью органов чувств (предварительный стандарт мос, 12). в аналитической химии — чувствительность метода, которая (для простого-метода)- характеризуется наклоном калибровочной кривой, т. е. является дифференциалом измеряемой величины по отношению к концентрации dx/dc. чувствительность не следует путать с наименьшим количеством или наиболее низкой концентрацией, которые можно обнаружить с помощью данного метода; правильный термин для обозначения этого понятия — предел чувствительности (см. limit of detection).
- The output of a microphone in volts for a given input in sound pressure level. sensitivity can also mean the sound pressure level (spl) a loudspeaker produces at one meter when driven with one watt of pink noise.
- The degree of confidentiality of an e-mail message or calendar item, ranging from normal to confidential.
- The significance level that must be reached before a notification is sent.
- Чувствительность:
- Measure of a sensor’s ability to detect small signals. see resolution.
- Ability of a sensor or system to distinguish a signal or indication from background noise. see also probability of detection.
- Ability of a sensor or system to distinguish a signal or indication from background noise. see also probability of detection. si (international system of units): international measurement system in which the following seven
- (1) performance characteristic of a penetrant system, of a developer, or of an entire penetrant process that provides a relative measure of the ability to detect discontinuities. (2) enumerated level of performance of a penetrant system determined by applying standardized processing procedures on reference standards with known defects. (3) ability of a sensor or system to distinguish a signal or indication from background noise. compare probability of detection.
- Probability of detection.
- Ability of signal to change with small changes of measured quantity.
|
Slugging (stubbing), английский
The addition of a separate piece or pieces of material in a joint before or during welding.
Bleed out (pt), английский
The action by which the penetrant exudes out of the discontinuities onto the surface of a component, due primarily to “capillary action” and to “blotting” or “soaking up” effect of the developer.
|
|
|
|
|
|
|
