|
|
|
|
|
|
|
|
|
Tensile stiffness
| Глоссарий в целлюлозно-бумажной промышленности |
|
Сопротивление разрыву при, русский
|
Stiffness, английский
- See "shaft stiffness"
- Rigidez, dureza, agarrotamiento, entumecimiento
- The ratio of the force applied to a structure (or a structural element) to the corresponding displacement.
- The fact of being stiff arthritis accompanied by stiffness in the joints
- The property of a fiber or fabric to resist bending, or to carry a load without deformation.
- The property of a fiber or fabric to resist bending or to carry a load without deformation. it is based on the fiber modulus.
- The ratio between stress and deformation.
- The ability of a metal or shape to resist elastic deflection. for identical shapes, the stiffness is proportional to the modulus of elasticity.
- The ability of a structure or shape to resist elastic deformation. for a given shape the stiffness scales with its moment of inertia (varies with cross sectional dimensions). compare ductility; hardness; modulus of elasticity.
- Slope of curve of stress to strain, described by young’s modulus of elasticity. compare hardness.
Stiffness factor, английский
Of a member, the ratio of the moment of inertia of the cross section to its length. stiffness factor 943 stick style
Stiffness property, английский
Stiffness property:, английский
A property used in the calculation of the deformation of the structure, such as modulus of elasticity, shear modulus, slip modulus.
Stiffness:, английский
Material resistance against deformation
Tensile, английский
Tensile (tension) test, английский
Tensile -, английский
Упругость при растяжении
Tensile bending strength, английский
Tensile factor, английский
The empirical factor t x e1/2 that describes the tenacity elongation exchange relationship for a large number of manufactured fiber systems.
Tensile force, английский
Tensile hysteresis curve, английский
A complex load-elongation, or stress-strain curve obtained: (1) when a specimen is successively subjected to the application of a load or stress less than that causing rupture and to the removal of the load or stress according to a predetermined procedure; or
Tensile index, английский
Tensile modulus, английский
The ratio of the tensile stress to the tensile strain over the range for which this ratio is constant.
Tensile recovery curve, английский
Tensile hysteresis curve
Tensile rupture, английский
Tensile rupture:, английский
The ultimate limit state where the shell plate experiences gross section failure due to tension.
Tensile straightening, английский
Tensile strain, английский
- The elongation of a material which is subject to tension.
- The greatest effort to extend, stretch, or draw asunder, as in proving bars of iron, chain-cables, &c.
- The relative length deformation exhibited by a specimen subjected to a tensile force. strain may be expressed as a fraction of the nominal gauge length or as a percentage. (also see elongation.)
Tensile strength, английский
- Résistance à la traction
- The longitudinal stress required to break a specimen of prescribed dimension divided by the original crosssectional area at the point of rupture (usually expressed in pounds per square inch).
- (also called ultimate strength) - breaking strength of a material when subjected to a tensile (stretching) force. usually measured by placing a standard test piece in the jaws of a tensile machine, gradually separating the jaws, and measuring the stretchi
- Предел прочности на растяжение
- Прочность на растяжение [на разрыв]
- The resistance of a material to rupture when subject to tension; the maximum tensile stress which the material can sustain.
- [1] the resistance of rope to a longitudinal force tending to break it. [2] the force that must be applied to break a rope.
- In general, the strength shown by a specimen subjected to tension as distinct from torsion, compression, or shear.
- 1. in general, the strength shown by a specimen subjected to tension as distinct from torsion, compression, or shear. 2. specifically, the maximum tensile stress expressed in force per unit cross-sectional area of the unstrained specimen, e.g., kilograms per square millimeter, pounds per square inch. (for maximum stress per unit linear density, see breaking tenacity or breaking length.)
- A measure of the ability of a material to withstand a tension (pulling apart) force. it is usually measured in mpa or psi of material cross section. thermal conductivity (k)
- The maximum stress that a material is capable of withstanding without breaking under a gradually and uniformity applied load. other terms commonly used to express the same thing are ultimate tensile strength and, less accurately, breaking strength.
|
Сопротивление разрыву при, русский
Показатель прочности на, русский
|
|
|
|
|
|
|
