|
|
|
|
|
|
|
|
|
Vertical limit
| Глоссарий по неразрушающему контролю в авиации |
- Maximum useful readable level of vertical indication on an a-scan.
- Maximum useful readable level of vertical indication on an a-scan.7
|
|
Limit, английский
- (ограничение) максимальная или минимальная величина цены, для принятия решения;
- Converge
- Предел; лимит; ограничение; предельный
- Лимит, т. е. максимальная или минимальная величина цены, для принятия решения.
- Лимит
- Предел, граница || ограничивать о
- Предел, граница. заданные или установленные максимальные или минимальные объем, количество или число [36].
Limit, английский
Limit (specified) strain, английский
Limit charge, английский
Limit checking, английский
Проверка границ
Limit control, английский
A safety device on a boiler, refrigerator, or air-conditioning system which shuts off the system and actuates alarms when unsafe conditions are detected. also
Limit cycle, английский
Предельный цикл
Limit cycle control, английский
Closed
Limit cycles, английский
An attractor for non-linear dynamic systems which has periodic cycles or orbits in phase space. an example is an undamped pendulum which will have a closed circle orbit equal to the amplitude of the pendulum`s swing. see: attractor, phase space.
Limit design, английский
Structural design based on any chosen limit of usefulness, such as a plastic limit, lightproof blind 590
Limit deviation tolerance, английский
Limit equilibrium, английский
Limit equilibrium method, английский
Limit frequency, английский
A mathematically derived frequency value used to establish impedance diagrams.
Limit grace logins, английский
Лимит попыток регистрации по истекшим паролям
Limit line, английский
Limit load, английский
Предельная нагрузка
Limit load factor, английский
Коэффициент максимальной эксплуатационной перегрузки
Limit of authority, английский
A location to which rail traffic may travel under a proceed authority. it may be defined by a sign, a signal capable of displaying a stop indication, or a specific kilometrage point on a line.
Limit of authority, английский
A physical track location to which a train can be given an authority to proceed. it may be a sign or a signal capable of displaying a stop indication or a specific kilometre location.
Limit of blank (lob), английский
Highest measurement result that is likely to be observed (with a stated probability) for a blank sample; typically estimated as a 95% one-sided confidence limit by the mean value of the blank plus 1.65 times the sd of the blank. [clsi]
Indication, английский
- Индикация
- A situation or sign which suggests that a specific treatment should be given or that a condition has a particular cause sulpha drugs have been replaced by antibiotics in many indications. contraindication
- (1) notice given by a dealer (through autex) or customer of an interest in buying or selling stock, sometimes including specific volume and price; (2) approximation of where a specialist sees buy and sell interest to tighten the range to an opening price.
- Выражение интереса (бирж.)
- In nondestructive inspection, a response or evidence of a response, that requires interpretation to determine its significance.
- Nondestructive test response that requires interpretation to determine its relevance. these include such things as meter deflections, shadows on radiographs, blips on screens, or localized discolorations on surfaces. see also defect; discontinuity; indication, false; indication, nonrelevant. indication, discontinuity: visible evidence of a material discontinuity. subsequent interpretation is required to determine the significance of an indication. indication, false: test indication that could be interpreted as originating from a discontinuity where no discontinuity exists. compare defect; ghost; indication, nonrelevant. false indications are an economic liability for inspection because they must be investigated. indication, nonrelevant: indication due to misapplied or improper testing. may also be an indication caused by an actual discontinuity that does not affect the usability of the test object (a change of section, for instance). indication, relevant: indication from a discontinuity (as opposed to a nonrelevant indication) requiring evaluation by a qualified inspector, typically with reference to an acceptance standard, by virtue of the discontinuity’s size, shape, orientation, or location.
- Nondestructive test response that requires interpretation to determine its relevance.4 see also defect; discontinuity; false indication; nonrelevant indication. indication, nonrelevant: indication that has no relation to a discontinuity that might constitute a defect.1 test response caused by geometry or by a physical condition that is not a discontinuity. indication, relevant: indication from a discontinuity (as opposed to a false indication) requiring evaluation by a qualified inspector, typically with reference to an acceptance standard, by virtue of the discontinuity’s size or location.1
- Nondestructive test response that requires interpretation to determine its relevance. compare defect; discontinuity; indication, false; indication, nonrelevant. indication, false: (1) test indication that could be interpreted as originating from a discontinuity but that actually originates where no discontinuity exists in the test object. (2) indication due to misapplied or improper testing. compare indication, nonrelevant; defect. indication, nonrelevant: indication that has no relation to a discontinuity that might constitute a defect. test response caused by geometry or by a physical condition that is not a discontinuity (a change of section, for instance). indication, relevant: indication from a discontinuity (as opposed to a false indication) requiring evaluation by a qualified inspector, typically with reference to an acceptance standard, by virtue of the discontinuity’s size or location.
- Nondestructive test response that requires interpretation to determine its relevance. compare defect; discontinuity. see also indication, false; indication, nonrelevant. indication, false: (1) test indication that could be interpreted as originating from a discontinuity but that actually originates where no discontinuity exists in the test object. (2) indication due to misapplied or improper testing. compare indication, nonrelevant. indication, nonrelevant: indication that has no relation to a discontinuity that might constitute a defect. test response caused by geometry or by a physical condition that is not a discontinuity (a change of section, for instance). indication, relevant: indication from a discontinuity (as opposed to a false indication) requiring evaluation by a qualified inspector, typically with reference to an acceptance standard, by virtue of the discontinuity’s size or location.
- Nondestructive test equipment response to a discontinuity that requires interpretation to determine its relevance.4 in magnetic particle testing, a visible accumulation of magnetic particles that serves as evidence of a magnetic leakage field.
- Defect, discontinuity, false indication and nonrelevant indication. induced current magnetization: noncontact means for testing delicate ring shaped objects for circumferential discontinuities. the technique is based on the fact that a time varying current passing through an internal conductor, often a soft iron or laminated core, self-induces an encircling magnetic field. this time varying magnetic field will induce a secondary current circling through the ring. this secondary current then self-induces the toroidal magnetic field used for testing.
- Nondestructive test equipment response to a reflector, requiring interpretation to determine its relevance. compare crack; defect; discontinuity; indication, false.10 indication, discontinuity: visible evidence of a material discontinuity. subsequent interpretation is required to determine the indication’s significance.10 indication, false: test indication that originates where no discontinuity exists in the test object. compare defect; indication, nonrelevant.10 indication, nonrelevant: indication possibly caused by an actual discontinuity that does not affect the usability of the test object (a change of section, for instance) or that is smaller than a relevant indication. compare indication, false and indication, relevant.10 indication, relevant: indication from a discontinuity (as opposed to a nonrelevant indication) requiring evaluation by a qualified inspector, typically with reference to an acceptance standard, by virtue of the discontinuity’s size, shape, orientation or location. compare indication, nonrelevant.10,19
|
Vertical linearity, английский
See linearity, amplitude.
Vector quantity, английский
- Any physical quantity whose specification involves both magnitude and direction. examples include magnetic and electric fields, electrical impedance, and velocity.
- Any physical quantity whose specification involves both magnitude and direction and that obeys the parallelogram law of addition.4
|
|
|
|
|
|
|
